Standard Mounts Installation Instructions
Sizes: 3", 5", 7", and 10" Bigfoot
Step 1: Preparation
Determine the location for your mount. Ensure it is clear of obstructions and allows for proper trolling motor clearance and line of sight.
Measure and mark the area for drilling, if required, using the mount's base as a guide.
Step 2: Drilling
Drill holes according to the marked points, ensuring they align perfectly with the mount’s base.
Use a drill bit appropriate for the material of your boat deck.
Step 3: Installation
Secure the mount to the deck using stainless steel hardware (fully threaded 1/4-20 bolts, nylon nuts, and washers recommended).
Tighten all bolts securely, ensuring the mount is stable.
Step 4: Attach Graphs
Mount your graphs onto the Standard Dual Plate or 2" Offset Dual Plate (if applicable).
Check alignment and adjust as needed.
Best Usage: Ideal for dual displays supporting up to two 12" graphs. Ensure proper placement to maximize visibility and minimize interference.
Mega Mount Series Installation Instructions
Sizes: 5", 7" Mega Slim, 7" Mega Pro XL, and 10" Mega Mount
Step 1: Preparation
Select an appropriate location for installation, ensuring proper clearance for trolling motors and optimal line of sight.
Use the mount base to mark drilling points for the desired plate size.
Step 2: Drilling
Drill holes as marked, ensuring precision to avoid misalignment.
Use a suitable drill bit for the material of your boat deck.
Step 3: Installation
Attach the Mega Mount directly to the deck using stainless steel hardware (1/4-20 bolts, nylon nuts, and washers recommended).
For larger setups, pair with the Mega Dual Plate or other compatible plates for additional support.
Tighten all fasteners securely to prevent movement or vibration.
Step 4: Graph Setup
Attach your graphs, ensuring proper alignment. The Mega Mount Series supports up to two 15" graphs or equivalent combinations.
Verify stability and make adjustments if necessary.
Optional Configuration: If using the Standard Dual Plate or 2" Offset Dual Plate, follow the same drilling and mounting process to expand the mounting footprint.
Best Usage: Perfect for larger dual displays or a combination of displays, addressing vibration with a built-in support system for enhanced stability.
Pro Series Installation Instructions
Will Davis Jr.’s 2024 Configuration:
Bow: 7" Mega Pro Series with Mega Dual Mount and Dual In-Line
Dash: Single Dash Mount and Dual In-Line
Step 1: Preparation
Identify the mounting location on the bow or dash, ensuring sufficient clearance and optimal view angles.
Mark the mounting points using the Pro Series mount base as a guide.
Step 2: Drilling
Drill holes based on the marked points. Ensure precision to avoid misalignment.
Use the appropriate drill bit for your boat’s deck material.
Step 3: Installation
Secure the Pro Series mount using stainless steel hardware (1/4-20 bolts, nylon nuts, and washers recommended).
For the bow, pair the mount with the Mega Dual Mount and Dual In-Line for added functionality.
For the dash, use the Single Dash Mount and Dual In-Line setup. Tighten all bolts securely.
Step 4: Attach Graphs
Mount your graphs onto the Pro Series setup. Ensure proper alignment and balance.
Adjust the positioning of each graph for optimal visibility and stability.
Best Usage: Engineered for professional anglers, the Pro Series supports complex configurations like Will Davis Jr.'s setup, ensuring stability, durability, and performance for tournament-level fishing.
General Tips for All Mounts:
Always use stainless steel hardware to prevent corrosion.
Double-check all alignments before final tightening.
Periodically inspect your mounts to ensure long-term reliability.
For additional assistance, visit our Boat Installation Facebook group HERE, contact Str8 Up Mounts at info@str8upmounts.com for expert advice or visit www.str8upmounts.com for detailed guides and videos.
Comments